PET crystallizer
隐藏域元素占位
Category:
- Product Description
- Specifications
-
- Commodity name: PET crystallizer
Keernai builds the PET crystallizer machine to prepare PET chips before drying and keep the material free flowing
The PET crystallizer machine prepares PET chips for drying by raising their surface temperature in a controlled way. The chips gain a crystalline skin that keeps them free flowing when they reach the dehumidifying dryer. The unit sits between the material loader and the dryer, so the throughput of the line stays balanced.
The machine is built for PET resin, the hygroscopic material used in bottles, sheet, filament and strapping. Without the crystallization step the chips can soften and stick in the hopper, which blocks the dryer and stops the line. The design keeps the material moving through a heated chamber, so each chip receives the same treatment before it leaves.
Keernai supplies the crystallizer as part of its drying equipment range, together with hopper dryers, dehumidifying dryers, suction machines and mould temperature controllers. For a quotation, send the resin type, the throughput, the drying temperature and the machine downstream. We can then confirm the hopper volume, the heater and the connection size for the line.
Previous Page
Next Page
Product Details
Keernai builds the PET crystallizer machine to prepare PET chips before drying and keep the material free flowing
The PET crystallizer machine prepares PET chips for drying by raising their surface temperature in a controlled way. The chips gain a crystalline skin that keeps them free flowing when they reach the dehumidifying dryer. The unit sits between the material loader and the dryer, so the throughput of the line stays balanced.
The machine is built for PET resin, the hygroscopic material used in bottles, sheet, filament and strapping. Without the crystallization step the chips can soften and stick in the hopper, which blocks the dryer and stops the line. The design keeps the material moving through a heated chamber, so each chip receives the same treatment before it leaves.
Keernai supplies the crystallizer as part of its drying equipment range, together with hopper dryers, dehumidifying dryers, suction machines and mould temperature controllers. For a quotation, send the resin type, the throughput, the drying temperature and the machine downstream. We can then confirm the hopper volume, the heater and the connection size for the line.
- Strong safety performance: Provide multiple anti-theft designs to ensure the safety of home and property.
- High durability: Made of high-quality materials, corrosion-resistant and wear-resistant, with a long service life.
- Appearance diversity: Rich design styles, perfect match with various decorations.
- Easy operation: Intelligent design, no key required, simple and efficient to use.
- Multifunctionality: With alarm prompts and networking functions, it meets the needs of multiple scenarios.
- Easy installation: Compatible with a variety of door types, quick installation, and strong adaptability.
Certificate
FAQ
Q
What are the common reasons for the mold temperature controller alarming and shutting down?
A
Common reasons include high-temperature protection, low liquid level alarm, overload protection, heating element failure, or pump malfunction.
Q
Why is the cooling performance of the chiller poor?
A
Possible causes include insufficient refrigerant, blocked condenser, compressor failure, or pipeline leakage. Inspections and repairs are needed.
Q
What is the working principle of a mold temperature controller (MTC)?
A
The MTC heats or cools the medium (such as water or thermal oil) to a set temperature and then circulates it through the mold or equipment via a pump to achieve precise temperature control.
Q
Why is the mold temperature controller heating up slowly?
A
Possible reasons include insufficient heating power, pump failure, pipeline blockage, or insufficient medium. These should be checked and resolved step by step.
Q
What is the difference between a mold temperature controller and a chiller?
A
The MTC is used for heating and maintaining the temperature of equipment or molds, while the chiller is mainly used for quickly cooling equipment or molds to lower the temperature.
Contact
Fax: 86-750-3609612
Add: No. 38, Yecheng Industrial Zone, Kautou Star Village, Jianghai District, Jiangmen, Guangdong, China