Three-in-One Conveyor-Type Dehumidifying Dryer
Three-in-One Conveyor-Type Dehumidifying Dryer
Three-in-One Conveyor-Type Dehumidifying Dryer
+
  • Three-in-One Conveyor-Type Dehumidifying Dryer
  • Three-in-One Conveyor-Type Dehumidifying Dryer
  • Three-in-One Conveyor-Type Dehumidifying Dryer

Three-in-One Conveyor-Type Dehumidifying Dryer

Integrates dehumidification, drying, and two-stage material feeding into a single unit. The dehumidification section is equipped with a desiccant wheel, delivering stable low-dew-point air with a dew point as low as below –40°C. The stainless-steel double-walled insulated drying hopper features a bottom-blowing air duct design, ensuring uniform drying of the raw material while effectively preventing heat loss. The feeding system is fitted with a cut-off valve to ensure no residual material remains in the feed pipe. The closed-loop feeding system prevents contamination and reabsorption of moisture by the material. Optical-grade models are paired with a boiling-type photoelectric sensor hopper, which removes fine powder from the raw material, thereby avoiding defect formation during the molding of optical-grade products. The optical-grade model’s internal system is equipped with a high-efficiency filter that effectively captures particulate matter as small as 0.3 μm, achieving a filtration efficiency of 99.995%. Optional PLC control with an LCD touch-screen HMI is available, enabling centralized and convenient operation and full machine automation. A dew-point monitoring device can also be optionally purchased.

隐藏域元素占位

Keywords

  • Product Description
  • Specifications
    • Commodity name: Three-in-One Conveyor-Type Dehumidifying Dryer

    Integrates dehumidification, drying, and two-stage material feeding into a single unit. The dehumidification section is equipped with a desiccant wheel, delivering stable low-dew-point air with a dew point as low as below –40°C. The stainless-steel double-walled insulated drying hopper features a bottom-blowing air duct design, ensuring uniform drying of the raw material while effectively preventing heat loss. The feeding system is fitted with a cut-off valve to ensure no residual material remains in the feed pipe. The closed-loop feeding system prevents contamination and reabsorption of moisture by the material. Optical-grade models are paired with a boiling-type photoelectric sensor hopper, which removes fine powder from the raw material, thereby avoiding defect formation during the molding of optical-grade products. The optical-grade model’s internal system is equipped with a high-efficiency filter that effectively captures particulate matter as small as 0.3 μm, achieving a filtration efficiency of 99.995%. Optional PLC control with an LCD touch-screen HMI is available, enabling centralized and convenient operation and full machine automation. A dew-point monitoring device can also be optionally purchased.

    Integrates dehumidification, drying, and two-stage feeding into a single unit.
    The dehumidification section is equipped with a desiccant wheel, which delivers stable low-dew-point air with a dew point as low as below -40°C.
    The stainless steel double-layer insulated drying hopper features a bottom-blowing air duct design, ensuring uniform drying of the raw material while effectively minimizing heat loss.
    The feeding system is equipped with a cut-off valve to ensure that no residual material remains in the feed tube.
    A closed-loop feeding system can prevent raw materials from contamination or reabsorption of moisture.
    Optical-grade models are equipped with a boiling-type photoelectric hopper, which effectively removes fine powders from the raw materials, thereby preventing the formation of blemishes during the molding of optical-grade products.
    The optical model is equipped with a high-efficiency filter inside the system, which can effectively remove fine particulate ions as small as 0.3 μm, achieving a filtration efficiency of 99.995%.
    Optional PLC control with an LCD touch-screen HMI is available, enabling centralized and convenient operation and full machine automation.
    A dew-point detection device is available as an optional accessory.

    Model KS25 KS50 KS50W KS75 KS100 KS100W KS150 KS150W KS200 KS200W KS300 KS400 KS500 KS600
    Drying System Thermal Insulated Bucket Capacity (kg) 25 50 50 75 100 100 150 150 200 200 300 400 500 600
    Dry electric heating power (kW) 2.4 2.4 4 4 4 7.2 7.2 9 9 12 15 15 18 18
    Dryer fan power (kW) 0.4 0.4 0.75 0.75 0.75 1.1 1.1 1.5 1.5 2.2 2.2 4 5.5 7.5
    Dehumidification System Dehumidification air volume (m³/hr) 60 60 90 90 90 120 120 150 150 200 200 300 400 500
    Regenerative Electric Heating Power (kW) 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 4 4 7.2 7.2 7.2
    Regenerative Fan Power (kW) 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.4 0.4 0.4 0.75 0.75
    Feeding System Feed fan power (kW) 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.5 1.5 1.5 1.5 2.2 2.2
    Material suction machine piping 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
    Vacuum Hopper (L) 6 6 6 6 6 6 6 6 12 12 12 12 20 20
    Electric Eye Hopper (L) 3 3 3 3 6 6 6 6 12 12 12 12 24 24
    Appearance Height H (mm) 1530 1550 1650 1830 1830 1870 1870 1910 2180 2180 2300 2300 2700 2800
    Width W (mm) 1050 1050 1050 1100 1250 1180 1290 1340 1490 1490 1500 1550 1750 1760
    Depth D (mm) 850 850 850 870 970 960 960 1080 1100 1100 1100 1180 1320 1320
    Weight (kg)
    Weight
    250 280 300 320 385 442 449 475 530 560 615 635 760 850
    Product specifications are subject to change without prior notice.
    Note: (1) When selecting a dew-point detection device, add “D” after the model number.
    (2) When selecting a PLC control system paired with an LCD touch-screen HMI, add the letter “P” to the end of the model designation.
    (3) The machine’s voltage specifications are: 3φ, 380 VAC, 50 Hz.

Previous Page

Product Details

Integrates dehumidification, drying, and two-stage feeding into a single unit.
The dehumidification section is equipped with a desiccant wheel, which delivers stable low-dew-point air with a dew point as low as below -40°C.
The stainless steel double-layer insulated drying hopper features a bottom-blowing air duct design, ensuring uniform drying of the raw material while effectively minimizing heat loss.
The feeding system is equipped with a cut-off valve to ensure that no residual material remains in the feed tube.
A closed-loop feeding system can prevent raw materials from contamination or reabsorption of moisture.
Optical-grade models are equipped with a boiling-type photoelectric hopper, which effectively removes fine powders from the raw materials, thereby preventing the formation of blemishes during the molding of optical-grade products.
The optical model is equipped with a high-efficiency filter inside the system, which can effectively remove fine particulate ions as small as 0.3 μm, achieving a filtration efficiency of 99.995%.
Optional PLC control with an LCD touch-screen HMI is available, enabling centralized and convenient operation and full machine automation.
A dew-point detection device is available as an optional accessory.

Model KS25 KS50 KS50W KS75 KS100 KS100W KS150 KS150W KS200 KS200W KS300 KS400 KS500 KS600
Drying System Thermal Insulated Bucket Capacity (kg) 25 50 50 75 100 100 150 150 200 200 300 400 500 600
Dry electric heating power (kW) 2.4 2.4 4 4 4 7.2 7.2 9 9 12 15 15 18 18
Dryer fan power (kW) 0.4 0.4 0.75 0.75 0.75 1.1 1.1 1.5 1.5 2.2 2.2 4 5.5 7.5
Dehumidification System Dehumidification air volume (m³/hr) 60 60 90 90 90 120 120 150 150 200 200 300 400 500
Regenerative Electric Heating Power (kW) 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 4 4 7.2 7.2 7.2
Regenerative Fan Power (kW) 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.4 0.4 0.4 0.75 0.75
Feeding System Feed fan power (kW) 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.5 1.5 1.5 1.5 2.2 2.2
Material suction machine piping 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
Vacuum Hopper (L) 6 6 6 6 6 6 6 6 12 12 12 12 20 20
Electric Eye Hopper (L) 3 3 3 3 6 6 6 6 12 12 12 12 24 24
Appearance Height H (mm) 1530 1550 1650 1830 1830 1870 1870 1910 2180 2180 2300 2300 2700 2800
Width W (mm) 1050 1050 1050 1100 1250 1180 1290 1340 1490 1490 1500 1550 1750 1760
Depth D (mm) 850 850 850 870 970 960 960 1080 1100 1100 1100 1180 1320 1320
Weight (kg)
Weight
250 280 300 320 385 442 449 475 530 560 615 635 760 850
Product specifications are subject to change without prior notice.
Note: (1) When selecting a dew-point detection device, add “D” after the model number.
(2) When selecting a PLC control system paired with an LCD touch-screen HMI, add the letter “P” to the end of the model designation.
(3) The machine’s voltage specifications are: 3φ, 380 VAC, 50 Hz.
  • Strong safety performance: Provide multiple anti-theft designs to ensure the safety of home and property.
  • High durability: Made of high-quality materials, corrosion-resistant and wear-resistant, with a long service life.
  • Appearance diversity: Rich design styles, perfect match with various decorations.
  • Easy operation: Intelligent design, no key required, simple and efficient to use.
  • Multifunctionality: With alarm prompts and networking functions, it meets the needs of multiple scenarios.
  • Easy installation: Compatible with a variety of door types, quick installation, and strong adaptability.

Certificate


Certificate
Certificate
Certificate

FAQ


Q

Why does the oil temperature machine catch fire?


A

The fire situation of the oil temperature machine can be divided into two types: 1. The heat transfer oil itself is not touched by other items and spontaneous combustion occurs. Reason: A. The temperature of the heat transfer oil reaches the ignition point and catches fire in contact with air. B. The temperature of the heat transfer oil reaches the flash point and the volatile gas in the oil tank reaches a certain concentration.

Q

In industrial applications, air-cooled chiller refrigeration compressor protection devices have what role?


A

In industrial applications, chilled water or other liquid cooling is pumped through process or laboratory equipment. Chillers are used to control the cooling of products, mechanisms and plant machinery in all walks of life. They are commonly used in the plastics industry for injection and blow molding, metal processing and cutting.

Q

What are the application fields and functions of ultra-high temperature mold temperature machine


A

Ultra-high temperature mold temperature machine is a type of equipment classified according to the temperature control range of the mold temperature machine, corresponding to ordinary mold temperature machine and high temperature mold temperature machine, etc. Due to the different circulating heating media used, it is divided into two types: oil circulating mold temperature machine and water circulating mold temperature machine.

Q

How to extend the service life of high temperature oil mold temperature machine?


A

The application of mold temperature machine in various industries is very common. The equipment uses water or heat transfer oil as heat transfer medium. Through PID self-tuning adjustment method, the temperature of the application equipment can be accurately controlled.

Q

Why does the cold water machine have high pressure failure


A

Several common faults of cold water machine compressor briefly summarizes the common cold water machine fault problems, which can be roughly divided into four categories: 1. compressor fault: 1. first check whether the compressor can start normally, and measure whether the compressor voltage is normal.

< 12 >

Get A Quote

Note: Please leave your contact information and our professionals will contact you as soon as possible!

Submit

FOCUS ON TEMPERATURE CONTROL TECHNOLOGY

Contact

Fax: 86-750-3609612

Add: No. 38, Yecheng Industrial Zone, Kautou Star Village, Jianghai District, Jiangmen, Guangdong, China

Sign up for exclusive offers and updates!

Connnect with us!